1 KB DMAC SRAM-to-SRAM copy demo driven by the ra8_dmac HAL More...

#include <stdint.h>
#include "ra8_attributes.h"
#include "ra8_board_ek_ra8d2.h"
#include "ra8_boot_entry.h"
#include "ra8_cgc.h"
#include "ra8_dmac.h"
#include "ra8_err.h"
#include "ra8_isr.h"
#include "ra8_mstp.h"
#include "ra8_time.h"

Include dependency graph for main.c:

Enumerations
enum	dma_hal_config_t : uint32_t { k_dma_hal_baud = 115200U , k_dma_hal_period_ms = 1000U , k_dma_hal_buf_bytes = 1024U , k_dma_hal_buf_words = 256U , k_dma_hal_poll_limit = 100000U }
	Compile-time settings. More...
enum	dma_hal_byte_t : uint8_t { k_dma_hal_channel = 0U , k_dma_hal_byte_sh = 8U }
	Single-byte constants. More...

Functions
static void	internal_panic_halt (void)
	Park forever after a fatal DMA HAL demo initialization failure.
static void	internal_setup_or_halt (void)
	Bring CGC, SysTick, SCI8, LEDs, and MSTP up.
static void	internal_fill_buffers (void)
	Fill s_src with a deterministic pattern and clear s_dst.
static uint8_t	internal_verify (void)
	Verify that s_dst matches s_src element-by-element.
static ra8_err_t	internal_run_copy (void)
	Programme, software-fire, and wait for the DMAC channel.
void	main (void)
	The application entry point Reset_Handler hands control to.

Variables
static const uint8_t	s_dma_hal_ok_msg [] = "dmahal: copied 1024B match=Y\r\n"
	Output line tags.
static const uint8_t	s_dma_hal_bad_msg [] = "dmahal: copied 1024B match=N\r\n"
static uint32_t	s_src [k_dma_hal_buf_words]
	Source / destination buffers (32-bit aligned by element type).
static uint32_t	s_dst [k_dma_hal_buf_words]

Detailed Description

1 KB DMAC SRAM-to-SRAM copy demo driven by the ra8_dmac HAL

Tag: [Ring 6 / APP] {World: S}

The HAL-primitive twin of dma_memcopy_demo. It performs the identical 1 KB block copy but fires and waits entirely through the ra8_dmac API – ra8_dmac_software_trigger and ra8_dmac_wait_idle – instead of reaching for the raw channel register window (DMREQ.SWREQ / DMSTS.ACT). It therefore does not include ra8_dmac_regs.h at all: application code no longer touches DMAC MMIO directly.

Brings up CGC + SysTick + SCI8 + LEDs + DMAC0 channel 0. Once a second:

Fills a 1 KB source buffer with a deterministic pattern (i ^ (i >> 8)) and zeroes the destination buffer.
Programmes DMAC0 channel 0 for a 32-bit-wide, increment-both, single-block transfer of 256 words via ra8_dmac_start_block.
Software-triggers the channel via ra8_dmac_software_trigger and waits for completion via ra8_dmac_wait_idle.
Walks both buffers and reports "dmahal: copied 1024B match=Y\r\n" on the J-Link OB CDC channel.

LED1 toggles on every successful copy; LED2 toggles on a verification mismatch or a DMAC timeout.

Bare EK-RA8D2 only – no shields or external transceivers. Kept ALONGSIDE the raw-poke dma_memcopy_demo so the two paths can be diffed on the same bench.

Copyright: Copyright (c) 2026 Brighton Sikarskie SPDX-License-Identifier: MIT

Since: 0.1.0

Definition in file main.c.

Enumeration Type Documentation

◆ dma_hal_byte_t

enum dma_hal_byte_t : uint8_t

Single-byte constants.

Enumerator
k_dma_hal_channel	DMA HAL demo channel.
k_dma_hal_byte_sh	DMA HAL demo byte sh.

Definition at line 63 of file main.c.

◆ dma_hal_config_t

enum dma_hal_config_t : uint32_t

Compile-time settings.

Enumerator
k_dma_hal_baud	DMA HAL demo baud.
k_dma_hal_period_ms	DMA HAL demo period ms.
k_dma_hal_buf_bytes	DMA HAL demo buffer bytes.
k_dma_hal_buf_words	DMA HAL demo buffer words.
k_dma_hal_poll_limit	DMSTS.ACT poll bound.

Definition at line 54 of file main.c.

Function Documentation

◆ internal_fill_buffers()

void internal_fill_buffers ( void )

static

Fill s_src with a deterministic pattern and clear s_dst.

Writes the indexed XOR pattern into every source word and a zero sentinel into the corresponding destination word.

MC/DC:: Trivial loop with no compound decision – only the implicit loop exit condition. No N+1 vectors required.

Precondition: Buffers are statically allocated.; No DMAC transfer is active on the buffers.

Postcondition: Every word in s_src is set; s_dst is all-zero.; Both buffers remain valid DMAC word-transfer ranges.

Note: Not thread-safe with concurrent buffer or DMAC access.

Since: 0.1.0

Definition at line 148 of file main.c.

References k_dma_hal_buf_words, k_dma_hal_byte_sh, RA8_INTERNAL, s_dst, and s_src.

◆ internal_panic_halt()

void internal_panic_halt ( void )

static

Park forever after a fatal DMA HAL demo initialization failure.

Repeatedly executes WFI while preserving DMAC state for debug.

Precondition: Called only from boot failure or the terminal foreground path.; The caller does not require recovery without reset.

Postcondition: The core stays in WFI until external intervention.; No further DMAC request is issued.

Note: Not thread-safe; this is a terminal single-threaded path.

Since: 0.1.0

Definition at line 86 of file main.c.

References RA8_INTERNAL.

◆ internal_run_copy()

ra8_err_t internal_run_copy ( void )

staticnodiscard

Programme, software-fire, and wait for the DMAC channel.

Programmes DMAC0 channel 0 in block mode (DMTMD.MD = 10b), then uses the ra8_dmac HAL primitives to run the whole transfer without touching channel MMIO from application code:

ra8_dmac_software_trigger asserts DMREQ.SWREQ (one block per trigger).
ra8_dmac_wait_idle spins on DMSTS.ACT until the controller completes the block or the poll bound expires.

The channel is always stopped before returning so a failure never leaves it armed.

Returns: k_ra8_ok on success, k_ra8_err_hw_timeout if the channel never went idle, or a propagated start / stop error.

Precondition: s_src / s_dst populated.; DMAC channel zero is available for this transfer.

Postcondition: On success s_dst mirrors s_src.; The channel is stopped (DMCNT.DTE = 0) on every return path.

Note: Not thread-safe with concurrent channel-zero control.

Since: 0.1.0

Definition at line 215 of file main.c.

References k_dma_hal_buf_words, k_dma_hal_channel, k_dma_hal_poll_limit, k_ra8_dmac_width_word, k_ra8_ok, ra8_dmac_software_trigger(), ra8_dmac_start_block(), ra8_dmac_stop(), ra8_dmac_wait_idle(), RA8_INTERNAL, s_dst, and s_src.

◆ internal_setup_or_halt()

void internal_setup_or_halt ( void )

static

Bring CGC, SysTick, SCI8, LEDs, and MSTP up.

Initializes foreground-loop dependencies in order and parks on the first failed HAL operation.

Precondition: Reset startup initialized static storage and the vector table.; Called once before global interrupt enable.

Postcondition: On return, delays, console output, module clocks, and LEDs are ready.; DMAC channel zero remains stopped.

Note: Not thread-safe; it owns global peripheral initialization.

Since: 0.1.0

Definition at line 104 of file main.c.

References internal_panic_halt(), k_dma_hal_baud, k_ra8_board_led1, k_ra8_board_led2, k_ra8_clock_id_cpuclk0, k_ra8_ok, ra8_board_led_init(), ra8_board_uart_console_init(), ra8_cgc_get_clock_hz(), ra8_cgc_init(), RA8_INTERNAL, ra8_mstp_init(), and ra8_time_init().

◆ internal_verify()

uint8_t internal_verify ( void )

static

Verify that s_dst matches s_src element-by-element.

Compares each corresponding word and returns immediately on the first mismatch without modifying either buffer.

MC/DC:: Compound decision in the loop: s_dst[i] != s_src[i]. One atomic condition x 2 vectors – match (steady-state) and one mismatch (covered by the host integration test).

Returns: 1 if all elements equal, 0 otherwise.

Return values

1	All source and destination words match.
0	At least one word differs.

Precondition: Buffers are filled.; Any DMAC write to s_dst completed before this call.

Postcondition: Return value is 0 or 1.; Neither buffer is modified.

Note: Not thread-safe with concurrent buffer writers.

Since: 0.1.0

Definition at line 178 of file main.c.

References k_dma_hal_buf_words, RA8_INTERNAL, s_dst, and s_src.

◆ main()

void main ( void )

The application entry point Reset_Handler hands control to.

Returns void, not int. This is a freestanding image: there is no hosted C environment, no process and nothing to report an exit status to. ISO C fixes main at int only for a hosted implementation; for a freestanding one (C23 5.1.2.1) the startup function's name and type are implementation-defined, and this is that definition. Reset_Handler discards no value because there is none to discard, and if main ever does return, startup halts the CPU rather than resuming anything.

The firmware lane is compiled -ffreestanding (see cmake/ra8_add_app.cmake) and the flag and this signature travel together: without it both GCC and clang reject a non-int main (-Wmain / -Wmain-return-type). Do not remove one without the other.

That coupling is why the declaration sits behind __STDC_HOSTED__ == 0, which -ffreestanding sets and a hosted build does not. The guard is not defensive dressing: this header is reachable from host builds (the unit tests compile ra8_core natively), and an unguarded void main(void); makes every hosted translation unit that includes it fail with conflicting types for 'main' against its own ISO int main. The declaration therefore exists exactly where its contract does.

Hosted first-party code – everything under tests/ and tools/ – uses the ISO int main(...) contract instead, because it genuinely does run under an OS that reads the exit status. scripts/checks/check_entry_points.py holds each domain to its own contract (#707).

Declared here, once, for the same reason SystemInit is: every vector_table.c used to restate it as a local extern int32_t main(void);, sixteen copies that no compiler ever compared against the definition – and roughly thirty of them had silently drifted out of agreement with the main they called.

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit has configured the clock tree and VTOR.

Postcondition: Control does not return; the image runs until reset or halt.; Any value the application wanted to report has been logged, not returned.

Note: Not thread-safe; single-threaded startup context only.

Warning: Only valid while the translation unit is compiled -ffreestanding. A hosted build rejects this signature.

See also: SystemInit()

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Brings up CGC + BSP audio then plays blocks.

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit has set VTOR, FPU, and priority grouping.

Postcondition: On clean entry the CPU stays in the playback loop forever.; On any HAL init failure the function halts in WFI.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Brings up CGC + GPT triple, runs sweep.

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit has set VTOR, FPU, and priority grouping.

Postcondition: On clean entry the CPU stays in the sweep loop forever.; On any HAL init failure the function halts in WFI.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Brings up clocks + UART + RMII pins, then ThreadX.

Precondition: Reset_Handler has copied .data and zeroed .bss.

Postcondition: On clean entry the kernel runs the worker thread once.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Brings up clocks + UART, then enters ThreadX.

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit has set VTOR, FPU, and priority grouping.

Postcondition: On clean entry the kernel runs the worker thread forever.; On any HAL init failure the function halts in WFI.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Brings up LED, console, SDHI pins, then ThreadX.

Precondition: Reset_Handler has copied .data + zeroed .bss.; SystemInit has set VTOR, FPU, and priority grouping.

Postcondition: CPUCLK0 is raised to the PLL1 target before the kernel starts.; On clean entry the SD card thread runs forever.; On any HAL init failure the function halts in __WFI.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Brings up CGC + USB-FS + UAC1, then enters the iso-IN feed loop forever.

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit has set VTOR, FPU, and priority grouping.

Postcondition: On clean entry the CPU stays in the iso-IN feed loop forever.; On any HAL init failure the function halts in WFI.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: SystemInit set VTOR / FPU / priority grouping.

The application entry point Reset_Handler hands control to.

See file header.

Precondition: Boot init has completed.; The secure-boot library's BLXNS into NS image either failed or was skipped (the call site in ra8_trustzone_init is a no-op on host builds).

Postcondition: Diagnostic counter latched, CPU parked in a halt loop.; Function never returns.

Note: Single-threaded entry.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler copied .data and zeroed .bss.; SystemInit set VTOR / FPU / priority grouping.

Postcondition: On success g_eoh_chapters / g_eoh_crc hold the parsed results, the banner is emitted, and g_eoh_heartbeat advances once per frame.; On any failure g_eoh_err is non-zero and the CPU parks (no heartbeat).

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler copied .data and zeroed .bss.; SystemInit set VTOR / FPU / priority grouping.

Postcondition: The chapters/ch0-CRC banner is emitted; the CPU then loops in WFI.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler copied .data and zeroed .bss.; SystemInit set VTOR / FPU / priority grouping.

Postcondition: On success the g_etoc_* result globals hold the parsed TOC values, the banner is emitted, and g_etoc_heartbeat advances once per frame.; On any failure g_etoc_err is non-zero and the CPU parks (no heartbeat).

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler copied .data and zeroed .bss; SystemInit set VTOR/FPU.

Postcondition: The shelf scans on the panel; taps open books, browse, and read.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler copied .data and zeroed .bss.; SystemInit set VTOR / FPU / priority grouping.

Postcondition: The slab/arena/tile/vmem banner is emitted; the CPU then loops in WFI.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler copied .data and zeroed .bss.; SystemInit set VTOR / FPU / priority grouping.

Postcondition: On success the cache globals are latched and g_pc_heartbeat advances.; On any failure g_pc_err is non-zero and the CPU parks (no heartbeat).

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Profiles power modes once a second.

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit has set VTOR, FPU, and priority grouping.

Postcondition: On clean entry the CPU stays in the profile + blink loop.; On any HAL hard error LED2 latches ON.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler has copied .data and zeroed .bss.; The shared board boot files installed the vector table.

Postcondition: The demo has run once and its verdict banner is streaming steadily.; The CPU idles re-emitting the banner (or halts after a fatal init error).

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Brings up the clocks, console, SPI, and SD card, then runs the shared ra8_io VFS round-trip over the SD-over-SPI block device. On success it prints the exact PASS banner the HIL runner and ra8_emulator smoke gate scrape for; on any failure it prints FAIL and parks the core.

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit has set VTOR, FPU, and priority grouping.

Postcondition: On a clean run the CPU loops forever after the PASS banner.; On any failure the function prints FAIL and halts in WFI.

Note: Not thread-safe; this is the single-threaded app entry.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Initialises logging and the console, brings up the OSPI NOR volume, runs the erase-before-write round-trip, and prints a single PASS/FAIL verdict line over SCI8 before parking in an infinite loop.

Precondition: SystemInit configured VTOR / FPU / priority grouping.; The OSPI NOR array is present (modelled in ra8_emulator, real on silicon).

Postcondition: Exactly one PASS or FAIL verdict line has been queued on SCI8.; Control parks in an infinite loop; the function never returns.

Note: Single-threaded; runs to the park loop on the main stack.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler copied .data and zeroed .bss.; SystemInit set VTOR / FPU / priority grouping.

Postcondition: The page-count + render-hash banner is emitted; the CPU loops in WFI.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler copied .data and zeroed .bss.; SystemInit set VTOR / FPU / priority grouping.

Postcondition: The cal=OK / cal=SKIP result and the finger-free touchcal: ready sentinel are emitted; the CPU then loops in WFI.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler copied .data and zeroed .bss.; SystemInit set VTOR / FPU / priority grouping.

Postcondition: The open=OK touch banner is emitted; the CPU then loops in WFI.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Both USB controllers' clocks and pins come up before the kernel so the workers only deal with stack bring-up.

Precondition: Reset_Handler copied .data and zeroed .bss.; SystemInit set VTOR, FPU, priority grouping.

Postcondition: On clean entry the CPU stays in tx_kernel_enter forever.; On any HAL init failure the function halts in WFI.

Note: Single entry point; not re-entrant.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Brings up logging and the clock tree, releases the Cortex-M33 (which then blinks LED1 via ra8_pcntr_set_output()), and idles. See the file header.

Precondition: SystemInit has completed core bring-up.; The M33 is held in reset by hardware until released here.

Postcondition: The M33 has been released and is blinking LED1.; This function never returns to its caller.

Note: Single-threaded; no RTOS on the M85 in this template.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: The application links ra8_c6link and ESP-hosted generated codecs.; No hardware validation is inferred from this function.

Postcondition: No c6link operation is attempted.; No network or storage state is modified.

Note: Single-threaded compile fixture.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Brings up logging, the clock tree, and the VCOM console, runs the cacheable-SRAM round-trip with the D-cache that SystemInit() enabled through ra8_cache_dcache_enable(), emits the matching PASS / FAIL banner over the console and ra8_log, then parks in WFI. Every byte the self-test touches runs with the L1 caches + MPU enabled by the shared boot (RA8_BOOT_ENABLE_CACHE_MPU + RA8_BOOT_CACHE_VIA_HAL).

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit enabled the MPU + I-cache + D-cache via the ra8_cache HAL.

Postcondition: Exactly one banner (PASS or FAIL) has been emitted.; The core is parked in WFI.

Note: Single-threaded; no RTOS and no IRQ sources in this template.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Publishes the mailbox, releases the Cortex-M33 into the emitter, yields until it signals done, validates the blob the M33 built, then logs the PASS/FAIL verdict and the chapter count read back from the blob. See the file header for the offload narrative.

Precondition: SystemInit has completed core bring-up.; The M33 is held inactive by hardware until released here.

Postcondition: The M33 has built a RABOOK1 blob and the M85 has validated it.; This function never returns to its caller.

Note: Single-threaded; no RTOS on the M85 in this example.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler copied .data and zeroed .bss.; SystemInit set VTOR / FPU / priority grouping.

Postcondition: On success the CPU heartbeats after epaper: PASS.; On any HAL error the console prints epaper: FAIL and the red LED latches on.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler copied .data and zeroed .bss.; SystemInit set VTOR / FPU / priority grouping.

Postcondition: The chapters/toc/cover banner is emitted; CPU loops in WFI.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler copied .data and zeroed .bss.; SystemInit set VTOR / FPU / priority grouping.

Postcondition: The reader loop runs forever, redrawing on each tap.; A page-1 banner is emitted once after the first render.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler copied .data and zeroed .bss.; SystemInit set VTOR / FPU / priority grouping.

Postcondition: The cover-size / framebuffer-CRC banner is emitted; CPU loops in WFI.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler copied .data and zeroed .bss.; SystemInit set VTOR / FPU / priority grouping.

Postcondition: The panel shows the reader screen and the input loop runs forever.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Publishes the mailbox, arms the IPC0 wake and configures the LPM block, releases the Cortex-M33 into the reader, waits for the first held page, logs the page-0 verdict, then runs the #150 mode-switch cycle – parking in low-power WFI and waking on the M33's page-turn pokes – before logging the handoff verdict and parking for good. See the file header for the narrative.

Precondition: SystemInit has completed core bring-up.; The M33 is held inactive by hardware until released here.

Postcondition: The M33 has rendered + re-rendered the held page and the M85 is parked.; This function never returns to its caller.

Note: Single-threaded; no RTOS on the M85 in this example.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler copied .data and zeroed .bss.; SystemInit set VTOR / FPU / priority grouping.

Postcondition: The boot banner is emitted; the reader loop services taps forever.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Brings up the timebase then measures forever.

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit has set VTOR, FPU, and priority grouping.

Postcondition: On clean entry the CPU stays in the measure + blink loop forever.; On any HAL init failure the function halts in WFI.

Note: Never returns.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Arms the RIIC1 target and polls the dispatcher.

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit has set VTOR, FPU, and priority grouping.

Postcondition: The CPU stays in the dispatch poll loop forever.; On any fatal init error the CPU parks in riic_target_panic_halt.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit has set VTOR, FPU, and priority grouping.

Postcondition: On a clean run the PASS banner is printed and the CPU loops in WFI.; On any failure the function prints a FAIL line and halts.

Note: Not thread-safe; single-threaded app entry.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit has set VTOR, FPU, and priority grouping.

Postcondition: On clean entry the CPU stays in the read + print loop forever.; On any HAL hard error LED2 latches ON and the loop exits.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Brings up the LIN commander then drives frames.

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit has set VTOR, FPU, and priority grouping.

Postcondition: On clean entry the CPU stays in the LIN-frame + blink loop forever.; On any HAL init failure the function halts in WFI.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Brings up logging, "renders" page 0 into the shared mailbox, releases the Cortex-M33 into its hold loop, and parks the M85 in low-power WFI sleep. See the file header for the power-saving narrative.

Precondition: SystemInit has completed core bring-up.; The M33 is held inactive by hardware until released here.

Postcondition: The M33 owns the held page and the M85 is parked.; This function never returns to its caller.

Note: Single-threaded; no RTOS on the M85 in this example.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

The USB clock, pins, console, and the SD card all come up before the kernel so the worker only deals with USB stack bring-up.

Precondition: Reset_Handler copied .data and zeroed .bss.; SystemInit set VTOR, FPU, priority grouping.

Postcondition: On clean entry the CPU stays in tx_kernel_enter forever.; On any HAL init failure the function halts in WFI.

Note: Single entry point; not re-entrant.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler copied .data and zeroed .bss.; SystemInit configured VTOR / FPU.

Postcondition: On clean bring-up the CPU stays in the poll loop.; On any HAL init failure the function halts in WFI.

Note: Single entry point; not re-entrant.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler initialized static storage.; SystemInit configured VTOR, FPU, and priority grouping.

Postcondition: The startup banner is printed once.; Control enters ThreadX and never returns normally.

Note: The #707 freestanding contract is declared by ra8_boot_entry.h.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit has set VTOR, FPU, and priority grouping.

Postcondition: On a clean run the PASS banner is printed and the CPU heartbeats forever.; On any failure LED2 latches ON and the CPU parks.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Brings up logging, the clock tree, and the VCOM console, runs the three-step self-test (MPU enabled, canonical boot map, Device MMIO), emits the matching PASS / FAIL banner over the console and ra8_log, then parks in WFI.

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit installed the boot map via ra8_mpu_apply_boot_map().

Postcondition: Exactly one banner (PASS or a step-specific FAIL) has been emitted.; The core is parked in WFI.

Note: Single-threaded; no RTOS and no IRQ sources in this template.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler initialised the C runtime; SystemInit ran.; The EK-RA8D2 J-Link OB VCOM console is attached for the banner.

Postcondition: The commit + rollback attempts have executed against extra-MRAM.; The verdict banner is emitted once per report cycle.

Note: Single entry point; not re-entrant.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Initialises logging + console, brings up the MRAM volume, runs the wear-levelling + power-cycle-survival flow, and prints a single PASS/FAIL verdict.

Precondition: SystemInit configured VTOR / FPU / priority grouping.; The extra-MRAM region is present (modelled in ra8_emulator, real on silicon).

Postcondition: Exactly one PASS or FAIL verdict line has been queued on SCI8.; Control parks in an infinite loop; the function never returns.

Note: Single-threaded; runs to the park loop on the main stack.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Initialises logging + console, brings up the MRAM volume, runs the program/erase round-trip, and prints a single PASS/FAIL verdict.

Precondition: SystemInit configured VTOR / FPU / priority grouping.; The extra-MRAM region is present (modelled in ra8_emulator, real on silicon).

Postcondition: Exactly one PASS or FAIL verdict line has been queued on SCI8.; Control parks in an infinite loop; the function never returns.

Note: Single-threaded; runs to the park loop on the main stack.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Brings up the clocks, console, and SDHI bus pins, runs the native SD card identification, fills the payload, then runs the full ra8_io VFS round-trip over the native-SDHI block device. On success it prints the exact PASS banner the HIL runner and ra8_emulator smoke gate scrape for; on any failure it prints FAIL and parks the core.

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit has set VTOR, FPU, and priority grouping.

Postcondition: On a clean run the CPU loops forever after the PASS banner.; On any failure the function prints FAIL and halts in WFI.

Note: Not thread-safe; this is the single-threaded app entry.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Brings up the console and both stdio sinks, retargets the engine's stdio to the in-RAM capture sink, runs the two-backend swap, replays the RAM capture out of the UART, and prints a single PASS/FAIL verdict per abstraction before parking in an infinite loop.

Precondition: SystemInit configured VTOR / FPU / priority grouping.; The OSPI NOR array is present (modelled in ra8_emulator, real on silicon).

Postcondition: A PASS or FAIL verdict line has been queued on SCI8 for each abstraction.; Control parks in an infinite loop; the function never returns.

Note: Single-threaded; runs to the park loop on the main stack.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Brings up the clocks, console, and SDHI bus pins, runs the native SD card identification, fills the payload, then writes + reads + compares one raw 512-byte block straight against ra8_sdcard. On success it prints the exact PASS banner; on any failure it prints FAIL and parks the core.

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit has set VTOR, FPU, and priority grouping.

Postcondition: On a clean run the CPU loops forever after the PASS banner.; On any failure the function prints FAIL and halts in WFI.

Note: Not thread-safe; this is the single-threaded app entry.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler copied .data and zeroed .bss.; SystemInit set VTOR / FPU / priority grouping.

Postcondition: The whoami PASS banner is emitted; the CPU then loops in WFI.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Brings up clocks + UART + RMII + RSIP, then ThreadX.

Precondition: Reset_Handler has copied .data and zeroed .bss.

Postcondition: On clean entry the kernel runs the worker thread once.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit has set VTOR, the FPU and the priority grouping.

Postcondition: The banner was printed exactly once.; Control passed to ThreadX and never came back.

Note: Everything after tx_kernel_enter happens on ThreadX; the panic-halt below is reached only if the kernel refuses to start.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit has set VTOR, the FPU and the priority grouping.

Postcondition: The banner and the resolved pin map were printed exactly once.; Control passed to ThreadX and never came back.

Note: Everything after tx_kernel_enter happens on ThreadX; the panic-halt below is reached only if the kernel refuses to start.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit has set VTOR, the FPU and priority grouping.

Postcondition: The probe ran exactly once and printed its verdict.; The CPU stays in a slow heartbeat loop afterwards.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit has set VTOR, the FPU and the priority grouping.

Postcondition: The banner was printed exactly once.; Control passed to ThreadX and never came back.

Note: Everything after tx_kernel_enter runs on ThreadX; the panic-halt below is reached only if the kernel refuses to start.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Initializes and arms ADC_B, formats each successful channel sample without variadic I/O, emits the verdict, toggles LED1, and delays.

Precondition: Reset startup and SystemInit completed successfully.; The selected ADC channel matches the board analog connection.

Postcondition: Every PASS verdict follows a successful channel read.; Any read or LED failure leads to the terminal panic helper.

Note: Does not return during normal operation.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler copied .data and zeroed .bss.; SystemInit set VTOR / FPU / priority grouping.

Postcondition: On success the PASS banner is emitted; otherwise a FAIL line is.; The CPU parks in WFI (observable on ra8_emulator until its budget).

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Brings up logging, releases the Cortex-M33 (which then blinks LED1), and idles. See the file header for the teaching narrative.

Precondition: SystemInit has completed core bring-up.; The M33 is held in reset by hardware until released here.

Postcondition: The M33 has been released and is blinking LED1.; This function never returns to its caller.

Note: Single-threaded; no RTOS on the M85 in this template.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler copied .data and zeroed .bss.; SystemInit set VTOR / FPU / priority grouping.

Postcondition: The IDCODE/checks PASS banner is emitted; the CPU then loops in WFI.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

See the file header for the full behaviour summary.

Precondition: SystemInit has enabled the caches + MPU (this build defines RA8_BOOT_ENABLE_CACHE_MPU).; The M33 is held in reset by hardware until released here.

Postcondition: The M33 has been released and the round-trip loop is running.; This function never returns to its caller.

Note: Single-threaded; no RTOS on the M85 in this template.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Brings up logging, the clock tree, and the VCOM console, runs the three-step self-test (cacheable SRAM, RO MRAM const, Device MMIO), emits the matching PASS / FAIL banner over the console and ra8_log, then parks in WFI. Every byte the self-test touches runs with the L1 caches and MPU enabled by the shared boot (RA8_BOOT_ENABLE_CACHE_MPU).

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit enabled the MPU + I-cache + D-cache (cache+MPU build).

Postcondition: Exactly one banner (PASS or a step-specific FAIL) has been emitted.; The core is parked in WFI.

Note: Single-threaded; no RTOS and no IRQ sources in this template.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler copied .data and zeroed .bss.; SystemInit set VTOR, FPU and priority grouping.

Postcondition: The verdict banner is on SCI8 and the CPU parks.; The result globals hold the outcome for SWD probing.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Lights HOCO + PLL, then runs a 1 Hz blink.

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit has set VTOR, FPU, and priority grouping.

Postcondition: On clean entry the CPU stays in the toggle loop forever.; On any HAL init failure the function halts in WFI.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

See file header for behaviour summary.

Precondition: Boot init has completed.; CPU1 is held in reset.

Postcondition: CPU1 released and the ping-pong loop running.; Function never returns.

Note: Single-threaded entry.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler copied .data and zeroed .bss.; SystemInit set VTOR, FPU, priority grouping.

Postcondition: Control passes to the active app, or to the ThreadX-hosted DFU device.; On any HAL init failure the function halts in WFI.

Note: Single entry point; not re-entrant.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler copied .data and zeroed .bss; SystemInit ran.; The embedded image's first two words are a valid MSP + Thumb reset vector.

Postcondition: On success, control is at the image's reset vector in the SRAM run window.; On a failed run-target check, control parks in internal_dcr_panic_halt.

Note: Single entry point; not re-entrant.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler copied .data and zeroed .bss.; SystemInit set VTOR, FPU, priority grouping.

Postcondition: On clean entry the CPU stays in tx_kernel_enter forever.; On any HAL init failure the function halts in WFI.

Note: Single entry point; not re-entrant.

Since: 0.1.0

The application entry point Reset_Handler hands control to.

Precondition: Reset_Handler has copied .data and zeroed .bss.; SystemInit enabled the MPU + caches via RA8_BOOT_ENABLE_CACHE_MPU.

Postcondition: Exactly one PASS/FAIL banner is emitted, then the core parks.; The core ends in WFI so ra8_emulator's idle-stop terminates the run.

Since: 0.1.0

Definition at line 245 of file main.c.

References internal_fill_buffers(), internal_panic_halt(), internal_run_copy(), internal_setup_or_halt(), internal_verify(), k_dma_hal_period_ms, k_ra8_board_led1, k_ra8_board_led2, k_ra8_ok, ra8_board_led_toggle(), ra8_board_uart_console_write(), ra8_delay_ms(), ra8_isr_globals_enable(), s_dma_hal_bad_msg, and s_dma_hal_ok_msg.

Variable Documentation

◆ s_dma_hal_bad_msg

const uint8_t s_dma_hal_bad_msg[] = "dmahal: copied 1024B match=N\r\n"

static

Definition at line 70 of file main.c.

Referenced by main().

◆ s_dma_hal_ok_msg

const uint8_t s_dma_hal_ok_msg[] = "dmahal: copied 1024B match=Y\r\n"

static

Output line tags.

Definition at line 69 of file main.c.

Referenced by main().

◆ s_dst

uint32_t s_dst[k_dma_hal_buf_words]

static

Definition at line 74 of file main.c.

◆ s_src

uint32_t s_src[k_dma_hal_buf_words]

static

Source / destination buffers (32-bit aligned by element type).

Definition at line 73 of file main.c.

Enumerations

Functions

Variables

Detailed Description

Enumeration Type Documentation

◆ dma_hal_byte_t

◆ dma_hal_config_t

Function Documentation

◆ internal_fill_buffers()

◆ internal_panic_halt()

◆ internal_run_copy()

◆ internal_setup_or_halt()

◆ internal_verify()

◆ main()

Variable Documentation

◆ s_dma_hal_bad_msg

◆ s_dma_hal_ok_msg

◆ s_dst

◆ s_src