ra8_sci_cfg_t Struct Reference

Configuration descriptor for ra8_sci_init. More...

#include <ra8_sci.h>

Data Fields
uint32_t	baud
	Target baud rate in bps.
ra8_sci_data_bits_t	data_bits
	7 or 8 data bits.
ra8_sci_parity_t	parity
	Parity mode.
ra8_sci_stop_bits_t	stop_bits
	1 or 2 stop bits.
uint32_t	pclk_hz
	PCLKB frequency in Hz (used for BRR calculation).

Detailed Description

Configuration descriptor for ra8_sci_init.

cppcheck cannot see tests/ so it flags every field as unused; each member is read in ra8_sci_init in libs/ra8_hal/src/ra8_sci.c.

Definition at line 103 of file ra8_sci.h.

Field Documentation

baud

uint32_t ra8_sci_cfg_t::baud

Target baud rate in bps.

Definition at line 104 of file ra8_sci.h.

Referenced by internal_ccr2().

data_bits

ra8_sci_data_bits_t ra8_sci_cfg_t::data_bits

7 or 8 data bits.

Definition at line 105 of file ra8_sci.h.

Referenced by internal_ccr3().

parity

ra8_sci_parity_t ra8_sci_cfg_t::parity

Parity mode.

Definition at line 106 of file ra8_sci.h.

Referenced by internal_ccr1().

pclk_hz

uint32_t ra8_sci_cfg_t::pclk_hz

PCLKB frequency in Hz (used for BRR calculation).

Definition at line 108 of file ra8_sci.h.

Referenced by internal_ccr2().

stop_bits

ra8_sci_stop_bits_t ra8_sci_cfg_t::stop_bits

1 or 2 stop bits.

Definition at line 107 of file ra8_sci.h.

Referenced by internal_ccr3().

---

The documentation for this struct was generated from the following file:

• libs/ra8_hal/inc/ra8_sci.h