rtt_log_demo Directory Reference

Directory dependency graph for rtt_log_demo:

Directories
	src

Detailed Description

Minimal SEGGER RTT logging demo: allocates an RTT control block in SRAM and writes numbered lines through the in-tree rtt_write shim, toggling LED1 alongside each one.

The output leaves over SWD, not UART. The J-Link OB CDC port stays silent, so anything that scrapes a serial console sees nothing at all here – a host-side JLinkRTTViewer / JLinkRTTLogger is what captures it, and the automated check reads the up-buffer region out of memory over J-Link instead of a serial port.

The emulator models the host side of that protocol: it scans emulated SRAM for the "SEGGER RTT" control-block ID exactly as the J-Link OB does, drains up-buffer 0 respecting the ring wrap, and stores the advanced read offset back – so the same banner check runs headlessly.